Anti-skid road plates and steel road plates are designed as a temporary solution that are installed over potholes, trenches and ditches.
Steel Road Plates and Anti-Skid Road Plates provide access to traffic over broken ground, such as entrances to construction sites, potholes on roads and ground excavations.
Anti-Skid Road Plates for Roads Repair
Potholes are a huge problem in the UK, this is due to a few factors including; poor materials used in the construction of roads as well as, weather and environmental factors.
Anti-skid road plates provide a high friction, skid resistant road covering, installed to permit traffic, works access and pedestrian access over broken or excavated ground.
This type of road plate is generally opted for with highways agencies, local authorities and road networks due to the skid resistant surface.
[box type=”note” width=”600px” ]As per legislation (Safety at Street Works and Road Works Act), road plates intended for use on UK roads and streets must be treated with an appropriate skid resistant surface. [/box]St Helens Plant are approved manufacturers of anti-skid road plates and accredited installers of the Rocbinda Colorvial Anti-Skid, High Friction Surfacing System.
Anti-skid road plates are supplied with a full materials test certificate and available in various dimensions and depths.
Standard Dimensions and Depths
- 6ft x 4ft x ½” – half inch standard thickness
- 8ft x 4ft ¾” – 3/4 inch standard thickness
Bespoke sizes and specifications are also available on request.
Steel Road Plates
Steel road plates also allow roads and areas of traffic to remain open and in use during periods of public works, upgrades and maintenance. Generally, this type of road plate is used within construction sites and areas not open to pedestrians or public traffic.
St Helens Plant are fully approved BBA (British Board of Agreement) manufacturers of road plates. Road plates we manufacture are fully approved by HAPPAS and accredited by the BBA.
Steel road plates we supply are available in various sizes.
Standard Dimensions and Depths
- 6ft x 4ft x ½” – half inch standard thickness and
- 8ft x 4ft ¾” – 3/4 inch standard thickness
All road plates supplied and manufactured by St Helens Plant are provided with a full materials test certificate.
Bespoke sizes and specifications are also available on request.
Get a Quote
If your construction site, local authority or highways division is looking for cost-competitive steel road plates or anti-skid road plates, supplied at manufacturer-direct prices.
Contact St Helens Plant on – 01744 850 300 or email us at – [email protected].
